Skip to main content
Kacper Miszczyszyn |
At a customer's site a STAKMA Palletmax 10000 with an ABB robot is operating. The machine nails several pallets at once on a single table, and the robot removes the finished pallets and immediately stacks them. No pallets are handled manually, and only one or two operators are required. Below is a brief overview of how the installation works and what it delivers to the plant.
STAKMA Palletmax 10000 automatic machine with ABB robot at a customer's site
Palletmax 10000 with ABB robot: table with jigs, nailing head and robot above the table.

How does it work?

  1. Operator places boards in the jigs on the table. Several pallets fit on one table, side by side.
  2. The nailing head moves across the table and secures the boards. Controls and the nail counter are displayed on a 15‑inch screen.
  3. ABB robot picks up the finished pallet, flips it in the air and places it on the stack. It then returns for the next one.

Palletmax 10000 belongs to the Palettmax series from STAKMA: servo drive, magazines holding up to 1000 nails and continuous online support.

Head with nailers nails several pallets on the Palletmax 10000 deck
The nailing head travels over the table above pallets arranged side by side.

What does the plant gain?

  • No manual pallet removal: the robot takes each finished pallet and builds an even stack, so people focus on feeding boards and inspection.
  • Multiple pallets in one cycle: the jigs sit next to each other and the head nails them one after another.
  • Short runs without downtime: changing the pallet size only requires swapping the jig on the table, and re‑configuring the machine takes a few minutes.
  • Small crew: the Palletmax series operates with 1‑2 operators, and we train them during commissioning.
ABB robot removes the finished pallet from the Palletmax 10000 machine
ABB robot removes the finished pallet from the table.

What needs to be prepared in the hall?

For a machine with an ABB robot we recommend a hall height of 4500 mm (3000 mm is sufficient without the robot). The machine requires compressed air for the nailers and space for a stack of finished pallets within the robot’s reach. These requirements are agreed with the customer before ordering, together with the number of jigs for their pallets.

Similar robot installations were described for the Palletmax 6000 and Palletmax 7500.

Until 31 December 2026 you can purchase the Palletmax with robot €8,000 cheaper, i.e. the cost of the robot installation.

Stack of finished pallets placed by the robot at the Palletmax 10000
Finished pallets stacked by the robot.

Video of the machine in operation

Full video of the machine in operation at a customer: nailing head on the table, several pallets at once and an ABB robot placing the finished pallets onto a stack.

STAKMA Palletmax 10000 with ABB robot: from deck straight to stackSTAKMA Palletmax 10000 with ABB robot: from deck straight to stack

Sources

Machine and robot workflow described based on the customer installation and commissioning recordings.

Check whether the Palletmax with robot fits your plant

Step 1: free initial consultation. We discuss your production: what pallets you make, in which sizes and who currently removes the finished pallets.
Step 2: technical visit. If the project makes sense, we come to your site, inspect the hall and together calculate whether the investment will pay off.

Free consultation

Tell us how many pallets you produce per shift. We will call you back and arrange a consultation.



    Rate this article: - (0 votes)
    Helpful?
    Share:

    Write a comment

    Your email address will not be published. Your comment will appear after approval by the editorial team.